CRC200 2-Door Controller

Print this page

CRC200 standalone 2-door controllerThe CRC200 is a standalone 2-door/2-reader controller. It can also be incorporated into an access control system at a later date.

These compact units are suitable for controlling access through doors, barriers, rising bollards, turnstiles, etc., by validating cards, key fobs, vehicle tags, PINs, etc. They are easily programmed with the full keypad and LCD. The unit supports 2 readers, on either 1 or 2 doors.

The CRC200 is compatible with most reader types including proximity, smart card, magnetic stripe and long range readers. It supports a card capture facility when used with a Nortech card capture reader.

The controllers are available in 2 models depending on whether the cards being used are sequentially or randomly numbered.

This controller can be incorporated into the Norpass3 access control system and is therefore ideal for systems that require an upgrade path to online access control management.

Benefits

  • Compact design allows it to be fitted in small spaces

  • Can be configured for one or two doors

  • Can be used with most reader technologies thereby supporting a wide range of applications

  • Capacity to handle up to 65,000 cards with a wide range of access rights

  • Block validation and voiding for quick and easy card management

  • Fast and simple card verification

  • Can be used with a card capture reader 

  • Variable output relay timing to match most applications

  • Prevents card misuse

  • Can be readily incorporated into the Norpass3 software to reduce the cost of expansion

Show/Hide Technical Data

Specifications

Electrical

 

Supply Voltage:

12 - 24V DC

Current Requirement:

100 mA quiescent, 230 mA while reading (both readers)

Reader Supply:

5V DC (100mA max.)  or supply voltage

 

 

Physical

 

Display:

2 lines x 16 character LCD

Keypad:

12 button membrane. Keys 0 to 9 plus ‘Program’ and ‘Enter’

Dimensions (mm):

190 x 130 x 43 (H x W x D)

Cable Termination:

Pluggable Screw terminal blocks

 

 

Environmental

 

Operating Temperature:

 0oC to 40oC

Storage Temperature:

-20oC to 70oC

Relative Humidity:

95% non-condensing

 

 

Capacity

 

CRC200-S:

20,000 sequential card numbers (0 - 19,999),  1,700 events

CRC200-R:

6,550 random card numbers,  1,300 events

 

 

Inputs

 

Readers:

2 x 5-wire reader interfaces for Clock & Data (ABA Track 2) & Wiegand formats

Arming:  

2 independent, ground activated inputs (shared with ‘Door open’ monitor). Open-circuit arming.

Door Open Monitor:

2 independent, ground activated inputs (shared with ‘Arming’). Monitor door open status for system alarm reporting.

Request to Exit:

2 independent, ground activated inputs, each operating the associated latch relay.

 

 

Outputs

 

Latch Relays:

2 independent latch relays with change-over contacts rated at 2A at 30V DC.

Auxiliary Output:

2 independent open-collector outputs for auxiliary control such as card capture.

 

 

Data Communication

 

Management Interface:

RS485 (up to 32 controllers per control port)

 

 

Cabling

 

CRC200 to reader:

Belden 9536 or equivalent (100m maximum)

RS485 comm’s:

Belden 9729 or equivalent (1,200m maximum overall length)