CRC200+ Standalone Door Controller

CRC200+ Standalone Door Controller

'2-Door Access - Standalone or Online'

Extremely versatile standalone 2-door/2-reader controller that can also manage up to 65,000 users and supports both Clock & Data and Wiegand interface formats

Request Quote

Product Features & Benefits

The compact CRC200+ is suitable for controlling access through doors, barriers, rising bollards, turnstiles, etc., by validating cards, key fobs, vehicle tags, PINs, etc. It is easily programmed with the full keypad and LCD. The unit supports 2 readers, on either 1 or 2 doors.

The CRC200+ is compatible with most reader types including proximity, smart card, magnetic stripe and long range readers. It supports a card capture facility when used with a Nortech card capture reader.

Benefits

  • Compact design allows it to be fitted in small spaces
  • Can be configured for one or two doors
  • Can be used with most reader technologies thereby supporting a wide range of applications
  • Capacity to handle up to 65,000 cards with a wide range of access rights
  • Comprehensive range of access control features supports added security and flexibility
  • Block validation and voiding for quick and easy card management
  • Fast and simple card verification
  • Can be used with a card capture reader
  • Variable output relay timing to match most applications
  • Prevents card misuse
  • Can be readily incorporated into the Norpass3 software to reduce the cost of expansion

Specifications

Electrical

Supply Voltage: 12 - 24V DC
Current Requirement: 100 mA quiescent, 230 mA while reading (both readers)
Reader Supply: 5V DC (100mA max.) or supply voltage

Physical

Display: 2 lines x 16 character LCD
Keypad: 12 button membrane. Keys 0 to 9 plus ‘Program’ and ‘Enter’
Dimensions (mm): 190 x 130 x 43 (H x W x D)
Cable Termination: Plug-in screw terminal blocks

Environmental

Operating Temperature: 0°C to 40°C
Storage Temperature: -20°C to 70°C
Relative Humidity: 95% non-condensing

Capacity

Sequential Mode: 65,000 sequential card numbers (0 - 19,999), 1,700 events
Random Mode: 8,000 random card numbers, 1,300 events

Inputs

Readers: 2 x 5-wire reader interfaces for Clock & Data (ABA Track 2) & Wiegand formats
Arming: 2 independent, ground activated inputs. Open-circuit arming.
Door Open Monitor: 2 independent, ground activated inputs. Monitor door open status for system alarm reporting.
Request to Exit: 2 independent, ground activated inputs, each operating the associated latch relay.
Tamper Input: Ground activate input - open circuit is alarm condition (online operation).

Outputs

Latch Relays: 2 independent latch relays with change-over contacts rated at 2A at 30V DC.
Auxiliary Output: 2 independent open-collector outputs for auxiliary control such as card capture.
Door Alarm: 2 independent open-collector outputs used to indicate a door alarm condition.
Door 1 alarm doubles up as a tamper alarm output (online operation).
Assignable Output: Open-collector output controlled from Norpass3 in online operation.

Data Communication

Management Interface: RS485 (up to 32 controllers per control port)

Cabling

CRC200 to reader: Belden 9536 or equivalent (100m maximum)
RS485 comm’s: Belden 9729 or equivalent (1,200m maximum overall length)