The range includes the PD160 single channel detector and the PD260 dual channel detector.
The ease of installation of this product is not only cost effective but a pleasure to operate when determining the optimal parameters using quick and easy-to-use on-board diagnostics.
Automatic frequency selection makes the avoidance of cross-talk quick and simple.
|Self-tuning range:||20μH to 1500μH|
|Sensitivity:||Fifteen step adjustable on the LCD menu:
Ranging from 0.01% DL/L to 5% DL/L
ASB (Automatic Sensitivity Boost) selectable
|Frequency:||Eight step adjustable on LCD menu
12 – 80 kHz (Frequency determined by loop geometry)
|Output Configuration:||2 output relays (3rd output optional)
Rated: 1A @ 230 VAC
Relay 1 – Presence
Relay 2 – Pulse on detect
Outputs configurable for:
Presence on detect OR fault
Pulse on detect OR undetect
|Filter (Delay):||Eight step selectable output filter ranging from 100ms to 10 seconds.
Default setting is OFF
|Pulse Output Duration:||Eight step selectable on the LCD menu:
Ranging from 50ms to 2 seconds.
Default set to 150ms
|Presence Time:||Permanent or Limited to approximately 1 hour for a 1% DL/L|
|Power Fail Memory:||Selectable – Infinite (refer to user manual)|
|Indications:||All diagnostic information accessible through the LCD Menu
Additional LED’s provided for power and channel status display
|Protection:||Loop isolation transformer, zener diode clamping on loop input, gas discharge tube|
12 to 24 V +/- 10% (AC/DC)