The PP1 series read a wide range of 125kHz type proximity cards and tokens. These may be from Nortech’s own extensive range of electronic credentials, existing third party cards and tokens, or a combination of both depending upon the application. Each reader model can support one or more card technologies together with a selection of output formats. The series include several dual technology models for simultaneously supporting two independent card technologies.
An ideal companion to Nortech’s range of access controllers, the PP1 reader series offer the perfect choice of reader for new installations, while the wide choice of supported technologies and interfaces makes it an ideal cost-effective option for extending existing third party installations and for supporting the use of existing credentials in new access control applications.
Connect
Contact Us
+44 (0)1633 485 533
Supply Voltage: | 5VDC to 16VDC |
Current Requirement: | 70 mA maximum |
Dimensions (mm): | 55 x 55 x 16 (H x W x D) |
Material: | ABS Plastic |
Rating: | IP66 - suitable for outdoor and indoor use |
Mounting: | Mounting hole centres 48mm, fits standard door entry panels |
Operating Temperature: | -30oC to 50oC Ambient |
Pigtail Cable Length: | 300mm |
Cable Gauge: | 7/0.2, 0.22mm stranded |
Conductors: | 8 core screened |
Reading Range: | Up to 50mm depending upon technology and the type of token or card |
Visual indication: | Dual colour LED (red/green) Normally red - blinks green when token or card is read Green when signal received from host controller on the LED line (active low) |