The WP1 smart card series is capable of reading a wide range of 13.56MHz type smart cards and tokens including LEGIC and Mifare.
An ideal companion to Nortech’s range of access controllers, the WP1 reader series offers the perfect choice of reader for new installations, while the wide choice of supported technologies and interfaces makes it an ideal cost-effective option for extending existing third party installations and for supporting the use of existing credentials in new access control applications.
Connect
Contact Us
+44 (0)1633 485 533
Supply Voltage: | 5VDC to 16VDC |
Current Requirement: | 250 mA maximum |
Dimensions (mm): | 90 x 90 x 18 (H x W x D) |
Colour: | Charcoal grey (standard version) |
Material: | ABS polycarbonate |
Rating: | IP65 - suitable for outdoor and indoor use |
Operating Temperature: | -20oC to 50oC Ambient |
Pigtail Cable Length: | 300mm |
Cable Gauge: | 7/0.2, 0.22mm stranded |
Conductors: | 8 core screened |
Reading Range: | Up to 100mm depending upon technology and the type of token or card |
Audible indication: | Bleeper controlled by host controller (active low) |
Visual indication: | Dual colour LED (red/green) Normally red - blinks green when token or card is read. Green when signal received from host controller on the LED line (active low) |