The VMS-RGB-10A uses low profile LED matrices and are each capable of displaying count values of up to 5 digits with the option to display ‘FULL’ when a count value falls below 1. The display options are set via the counting/control module. Display settings include the display colours and the options to replace the count value with ‘OPEN’ or 'SPACE' when the count value is 1 or more.
The sign has 10cm high characters and can be viewed at distances of up to 50 metres with a 30º horizontal viewing angle. The luminance of the signs can also be manually adjusted to match ambient light levels. The high intensity setting is ideal for regions with extremely strong sunlight. The default setting provides automatic luminance adjustment using the built-in ambient light sensor.
Depending upon the application, up to eight signs can be connected on a single RS485 bus, each displaying a different count value.
|Operating Temp.:||-25ºC to +60ºC|
|Display type:||10mm pitch pixel array - SMD with optical lens. Count values/status messages can be displayed in red, green or amber.|
|Display Resolution:||48 x 12 pixels|
|LED brightness:||Red > 3100 cd/m2
Green > 3720 cd/m2
Yellow > 7400 cd/m2
White > 12400 cd/m2
|Viewing angle:||B6 (30° horizontally)|
|Viewing distance:||6 to 50 metres|
|Enclosure:||Aluminium & RAL Black 9005 Coating (IP65 rated)|
|Dimensions (mm):||570 x 210 x 150 (W x H x D)|
|Display size (mm):||480 x 120 (~10cm high characters)|
|Cabling:||Fitted with a 5-metre, 2-pair screened cable, 22 AWG and 5-metre power cable.|
|Luminance control:||Built-in ambient light sensor|
|Display Function:||Selectable up to 5-digit count, 'FULL' , 'OPEN' or 'SPACE'.
Default setting: positive count values displayed in green, zero and negative values displayed as 'FULL' in red.
|Count Bus:||RS485 bus from a counter module or shared occupancy controller. Delivering up to 4 count values (NCT100, CPC202 or CPC204) or up to 8 count values (NCT200). The count value that is displayed on each sign is determined by a node value assigned to the sign during installation.|